Services by asset
-
Fire & smoke doors
Every door type that has to hold fire or smoke, from an apartment front door to a sliding door across a plant room.
-
Service penetrations
Everywhere a service crosses a fire-rated wall or floor — sealed for good, or built to be opened again.
-
Duct protection & dampers
The duct, the protection on it, the opening it passes through, and the damper sitting in that opening.
-
Structural steel protection
Slowing how fast a steel member heats, so it keeps holding the building up for the period the building requires.
-
Fire-rated construction
The barriers themselves — and the joints, panels and glazing that decide whether they hold.
-
Fire shutters & curtains
For openings a doorset cannot close. Machines that sit idle for years and then have to work once.
Across everything above
-
Inspection & baseline surveys
Find out what is actually in the building before anyone prices a programme against it.
-
Defect rectification
Turn a defect register into a work programme that can be closed out and evidenced.
-
Passive fire maintenance
Routine service on a cycle, so the assets are still doing their job in five years.
-
Audits & certification
Work already installed, reviewed against the test report behind it — including work FRS did not do.
-
Documentation & handover
The record that outlives the tag on the wall: what went in, where, and what supports it.
-
Design & technical support
We read the drawing and look at what is actually there, before it is built rather than after.
Questions
Frequently asked questions
- What passive fire services does FRS offer in Perth?
- Fire doors, asbestos fire doors, service penetrations, structural steel protection, duct protection and dampers, fire-rated construction, fire shutters and curtains, inspection and baseline surveys, defect rectification, maintenance, audits and certification, design and technical support, and documentation and handover.
- I do not know what the problem is called. Where do I start?
- Start with what you are dealing with — a failed door, a defect list, a detail that does not match the site. Send photos or the report and FRS will tell you what it is and what it needs.
- Does FRS work outside Perth?
- Yes, across regional Western Australia, including remote mine sites.

Drawings, photos or a defect report in front of you?
Send what you already have. We will tell you what else is needed before the work can be reviewed, priced or booked for site inspection.