Fire doors · Accessible housing
Fire doors in SDA and accessible housing: making them safe and usable
In disability and accessible housing, a fire door has two jobs that pull against each other. It must be easy to open for someone in a wheelchair or with limited strength, and it must close and latch by itself in a fire. The usual answer is a door that is held open or opened by a powered operator in normal use, and released to close automatically when the fire alarm goes off. Whatever hardware is added, the door must still match its tested fire doorset under AS 1905.1, and it must close safely if the power goes.
Where fire doors turn up in SDA and accessible housing
- Apartment entry doors in Class 2 buildings, opening onto a common corridor.
- Corridor and stair doors in apartment buildings and group homes.
- Doors to plant, bin and storage rooms inside the building.
- Doors between sections of larger group homes and shared buildings.
Where the two jobs clash
| Accessibility wants | Fire safety needs |
|---|---|
| A light door that opens with little force | A closer strong enough to latch the door shut |
| A wide opening for wheelchairs | A doorset tested at that size |
| Level thresholds | Gaps at the bottom within the tested limits |
| Doors held open for easy movement | Doors that close in a fire, every time |
| Lever handles, push buttons, card readers | Hardware the tested doorset allows |
How it is usually solved
- Hold-open devices that keep the door open in daily use and release it when the fire alarm activates.
- Powered door operators that open the door at the push of a button and let it close under fire alarm or power failure.
- Closers chosen with care, set as light as possible while still latching the door every time.
- Wider doorsets that were tested at that width, rather than a standard door in an oversized frame.
- Threshold details that keep the floor level while staying within the tested gap.
The key point: every one of these has to be checked against the door's tested doorset. Adding an operator, a hold-open magnet, a card reader or a new handle to a fire door without that check can void it. See Can you modify a fire door? and Can you install a digital lock or access control on a fire door?
What goes wrong
- Door wedged open because residents or carers cannot manage the closer.
- Closer turned down until the door no longer latches.
- Operator or magnet fitted by another trade without checking it is allowed on that doorset.
- Hold-open not linked to the fire alarm, or linked to the wrong zone.
- No plan for power failure, so the door stays open when the power drops.
- Gaps outside tolerance after floors were changed for level access.
Checking and servicing
Fire doors in these buildings are checked the same way as anywhere else, with extra attention to the hold-open and operator: does the door release and latch when the alarm is triggered, and does it close on power failure? A door that has to be propped open every day is a design problem, not a resident problem, and is worth raising with the owner or provider.
Under Regulation 48A of the Building Regulations 2012, the owner of a Class 2 to 9 building in Western Australia must keep its fire doors performing to the standard the building was approved to. More in What does a WA building owner have to do about passive fire?
What to do next
Send photographs of the door, its tag, its closer and any operator or hold-open device, and tell us what the residents need. FRS installs, modifies and services fire doorsets across Perth and regional Western Australia. See Fire doors.
Questions people ask
Can a fire door have an automatic opener?
Yes, if the opener is allowed on that tested doorset and the door still closes and latches on fire alarm and on power failure.
Can we hold fire doors open for residents?
Only with a hold-open device that releases when the fire alarm goes off. Never with a wedge or a hook.
Can we make the closer lighter?
Only as far as the door still closes and latches every time.
Can we add a card reader or a different handle?
Only if the tested doorset allows it. Check before anything is fitted.
Who checks the hold-open and operator work with the fire alarm?
The fire door contractor and the fire services contractor together. Agree who tests what.
General information, not legal advice. Your building surveyor is the right person to confirm what applies to your building.